Posted by: The Hitting Guru () on Mon Nov 6 17:03:17 2006

> >>> Hi Jack. Do you believe the sine wave is a by product of the hitter picking the ball up late or not starting his swing mechanics on time? <<<
>
> Hi Guru
>
> Waves in the swing plane is more a mechanical than timing problem. The batter may have timed the pitch but due to waves in the swing plane, the bat can pass above or below the plane of the incoming ball. – I will place below a couple posts from the Archives I wrote on this subject.
>
> Jack Mankin
> ##
>
> Re: stretching for chp
>
> Posted by: Jack Mankin (BrBatspeed@aol.com) on Fri Oct 12 22:14:43 2001
>
> >>> I have experimented with both linear and rotationl hitting and have found myself at 42 y.o. to be seldom sore the next day after hitting linear but usually sore sometimes very sore after rotational.Neck, shoulders, between the scapulas,lower back and groin areas are the big areas of concern.So I would like to recommend that young hitters though you are more resilent than I am now need to stretch alot more than normal to help prevent injury.I could see how big men like Canseco and McGwire can injure lower backs as well as other parts with the energy they apply to their body in rotation.Just be aware your using more muscles and more energy to the body and of course this coincides with it creating more batspeed. <<<
>
> Hi RQL
>
> Whether you are throwing a baseball, pushing a shot or swinging a bat, having flaws in the ballistic mechanics can lead to serious consequences. I wrote in a earlier post that I felt that flaws in the swing mechanics of Canseco, McGwire , Strawberry (and others) had contributed to their back and limb problems.
>
> At different times during their careers, they all exhibited serious wrist binds and irregular movements of the bat and body. Those flaws resulted from two main sources. (1) They did not keep their hands back near the back shoulder and allow rotation to accelerate the hand-path as they initiated the swing and applied tht. As they pulled the top-hand back, the hands, as a unit, moved linearly away from the body. (2) The bat-head was not accelerated cleanly into the swing plain where the wrist can freely operate. Their bat-head was accelerated to vertically down through the plain of the lead-arm.
>
> These flaws resulted in a great amount of stress being placed on the wrist, arms, body joints and muscles. The bat appeared to stall and then jerked forward as the wrist flipped over. Their swing planes looked more like a sine wave than a flat disc. They all had serious batting slumps during these periods. In 92 or 93, McGwire barely hit .200 with only 20 HR’s.
>
> RQL, I would be very careful switching back and forth between linear and rotational principles. As I stated earlier – the two transfer mechanics are not compatible.
>
> Jack Mankin
>
> ##
>
> Re: Torque causing a loop?
>
> Posted by: Jack Mankin (MrBatspeed@aol.com) on Sun Aug 12 10:51:57 2001
>
> >>> Jack, I have read and fully understand your concepts.
>
> But (I think) the application of torque has caused a problem in my swing. I feel like I am breaking down as a hitter.
>
> My teammates are telling me I am uppercutting terribly and that my back shoulder is dropping. I am popping everything up or just striking out.
>
> This has all happened after I have tried to use torque and rotation in my swing and have better rotational mechanics.
>
> Is there a possible reason and solution to this problem? What's wrong? Please help me! <<<
>
> Hi Person
>
> One of the defining characteristics of a great hitter is the early development of bat-head speed in their swing. This is generated from a mechanic I termed, “top-hand-torque” where the batter keeps their bottom-hand fairly stationary near the armpit to serve mainly as a pivot point. The bat-head is then accelerated in an arc back toward the catcher as the batter pulls back with the top-hand.
>
> In my instructional video, I demonstrate how effective the mechanic can be in generating great bat speed. I also show the perils a batter can get into if done incorrectly. When done correctly, (1) the bottom-hand stays back as (2) the top-hand applies a pulling force that accelerates the bat-head into the intended plane of the swing.
>
> Real problems occur when the batter does not adhere to those two main points.
> (1). Most hitters have a natural tendency to extend the hands forward at initiation. This will cause many problems with rotational mechanics and is even a graver problem when applying top-hand-torque. For reasons I have explained in the video (and on the discussion board), serious bio-mechanical wrist binds occur that results in a loss of bat speed and forces the bat out of its true contact plane when the wrist is not allowed to rotate within the normal range of movement.
>
> (2). As I mentioned above, the bat-head must be accelerated into the plane of the swing when applying top-hand-torque. Serious bio-mechanical wrist binds also occur when the batter accelerates the bat-head back in a more vertical plane that cuts down through the swing plane. And it should be obvious that if the batter accelerates the bat-head back toward the catcher on a more vertical plane at the start of his swing, he will have a “looping uppercut” in the contact zone.
>
> One of the main reasons I request a frontal view of the batter (from the pitcher’s mound) for Swing Review Analysis is to check the batter’s swing plane at initiation. Regardless of what position or angle the batter holds the bat in his ready position, the bat must be brought inline with the lead-arm at initiation. The lead-arm should always be the plane of the swing from initiation to contact. The batter has a real problem if the bat starts above and then falls below the line (or plane) of the lead-arm.
>
> Person, if you are serious about your swing, you would be ahead of the game by ordering my Instructional Video and a Swing Review.
>
> Jack Mankin
----------------------------------------------------------------------

Jack thanks for the incite and prior post. Do you think that same mechanical deficiency could result in the hitter taking his top hand off the bat prematurely? I noticed that on occasion when I could not keep my weight back I had a premature top hand release. In addition I noticed pain in my lead arm elbow as I was striking a certain area of the zone rather than rotating through.